• All Files

Home > Online Help

Firewall policies

The firewall policy is the axis around which most of the other features of the FortiGate firewall revolve. A large portion of the settings in the firewall at some point will end up relating to or being associated with the firewall policies and the traffic that they govern. Any traffic going through a FortiGate unit has to be associated with a policy. These policies are essentially discrete compartmentalized sets of instructions that control the traffic flow going through the firewall. These instructions control where the traffic goes, how it’s processed, if it’s processed and even whether or not it’s allowed to pass through the FortiGate.

When the firewall receives a connection packet, it analyzes the packet’s source address, destination address, and service (by port number). It also registers the incoming interface, the outgoing interface it will need to use and the time of day. Using this information the FortiGate firewall attempts to locate a security policy that matches the packet. If it finds a policy that matches the parameters it then looks at the action for that policy. If it is ACCEPT the traffic is allowed to proceed to the next step. If the Action is DENY or a match cannot be found the traffic is not allowed to proceed.

The 2 basic actions at the initial connection are either ACCEPT or DENY:

• If the Action is ACCEPT, the policy action permits communication sessions. There may be other packet processing instructions, such as requiring authentication to use the policy. While you may not see it in the configuration there is the implied subset of the ACCEPT Action that include VPN policies, whether they be an IPsec VPN or SSL.
• If the Action is DENY, the policy action blocks communication sessions, and you can optionally log the denied traffic. If no security policy matches the traffic, the packets are dropped. A DENY security policy is needed when it is required to log the denied traffic, also called “violation traffic”.

The policy may contain a number of instructions for the FortiGate firewall in addition to the ACCEPT or DENY actions, some of which are optional. Instructions on how to process the traffic can also include such things as:

• Logging Traffic
• Authentication
• Network Address Translation or Port Address Translation
• Use Virtual IPs or IP Pools
• Caching
• Whether to use address or Identity based rules
• Whether to treat as regular traffic or VPN traffic
• What certificates to use
• Security profiles to apply
• Proxy Options
• Traffic Shaping